Two-Way Radio User Manual

*
SURFACE
Data lines for C OMBINE=UNION:
First line:
1. List of surfaces.
Repeat this data line as often as necessary. Up to 16 entr ies are allowed per line.
Data line for COMBINE=INTERSECTION or COMBINE=DIFFERENCE:
First (and only) line:
1. First surface name.
2. Second surface name.
For C OMBINE=DIFFERENCE the second surface is subtracted from the first.
Data lines to define a surface when the CROP parameter is included:
First line:
1. Surface nam e.
Second line:
1. X-coordinate of the lower box corner.
2. Y-coordinate of the lower box corner.
3. Z-coordinate of the lower box corner.
4. X-coordinate of the opposite box corner.
5. Y-coordinate of the opposite box corner.
6. Z-coordinate of the opposite box c orner.
Third line (optional):
1. X-coordinate of the first point d efining the orientation.
2. Y-coordinate of the first point d efining the orientation.
3. Z-coordinate of the first point defining the orie ntation.
4. X-coordinate of the second point defining the orie ntation.
5. Y-coordinate of the second point defining the orie ntation.
6. Z-coordinate of the second point defining the orien tation.
Data lines to define a surface using elements or element sets when the TYPE=ELEMENT
parameter is used:
First line:
1. Element set name or element number. In A BAQU S/Explicit a blank data line can be specified
to automatically generate the exterior (free) faces of every elem ent in the model.
18.46–4
ABAQUS Version 6.1 Module:
ID:
Printed on: