Two-Way Radio User Manual

*
SURFACE SECTION
18.52
*
SURFACE SECTION: Specify section properties for surface elements.
This option is used to specify a surface elem ent cross-section. It must be used in conjunction with the
*
REBAR
LAYER option.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Part, Part instance
References:
•
“Surface elements,” Section 26.7.1 of the ABA QUS A nalysis User’s Manual
•
“Defining reinforcement,” Section 2.2.3 of the ABAQUS Analysis U ser’s Manual
• *
REBAR LAYER
Required parameter:
ELSET
Set this parameter equal to the name of the element set conta ining the surface elements for which
the section properties are being defined.
Optional parameter:
DENSITY
Set this parameter equal to the mass density per unit area of the surface element section.
There are no data lines associated with this option.
18.52–1
ABAQUS Version 6.1 Module:
ID:
Printed on: