Two-Way Radio User Manual

*
TORQUE
19.7
*
TORQUE: Define the torsional behavior of beams.
This option c an be used onl y in conjunction with the
*
BEAM G ENERAL SECTION,
SECTION=NONLINEAR GEN ERAL option.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Part, Part instance
References:
•
“Using a general beam section to define the section behavior,” Section 23.3.7 of the ABAQUS Analysis
User’s Manual
• *
BEAM GENERAL SECTION
Optional parameters (if neither ELASTIC nor LINEAR is included, elastic-plastic response is
assumed):
DEPENDENCIES
Set this parameter equal to the num ber of field variable dependencies included in the torque–twist
relationship, in addition to temperature. If this parameter is omitted, it is assumed that the
torque–twist relationship is constant or depends only on temperature. See “Specifying field
variable dependence” in “Material data definition,” Section 16.1.2 of the ABAQUS A nalysis
User’s Manual, for more information.
ELASTIC
Include this paramete r if the torque–twist rela tionship is nonlinear but el astic.
LINEAR
Include this parameter if the torque varies linearly with twist.
Data lines if the LINEAR par ameter is included:
First line:
1. Torsional stiffness of the section.
2. Temperature.
3. First field variable.
4. Second field variable.
5. Etc., up to six field variables.
19.7–1
ABAQUS Version 6.1 Module:
ID:
Printed on: