Two-Way Radio User Manual

*
TRANSVERSE SHEAR STIFFNESS
19.12
*
TRANSVERSE SHEAR STIFFNESS: Define transverse shear stiffness for beams and
shells.
This option must be used in conjunction with the
*
BEAM GENERA L SECTION option, the
*
BEAM
SECTION option, the
*
COHESIVE SECTION option, the
*
SHELL GENERAL SECTION option, or the
*
SHELL SECTION option. The transverse shear stiffness defined with this option affects only the transverse
shear flexible elements whose section properties are defined by the im mediately preceding section option.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Part, Part instance
References:
•
“Shell section behavior,” Section 23.6.4 of the ABAQUS Analysis User’s Manual
•
“Choosing a beam elem ent,” Section 23.3.3 of the ABAQ US Analysis User’s Manual
•
“Defining the constitutive response of cohesive elem ents using a continuum approach,” Section 26.5.5
of the ABAQUS Analysis User’s Manual
•
“Defining the constitutive response of cohesive elements using a traction-separation description,”
Section 26.5.6 of the ABAQUS Analysis User’s Manual
• *
SHELL GENERAL SECTION
• *
SHELL SECTION
• *
BEAM GENERAL SECTION
• *
BEAM SECTION
• *
COHESIVE SECTION
There are no parameters associated with this option.
Data line when used with cohesive sections, shell sections, and
*
BEAM GENERAL SECTION,
SECTION=MESHED:
First (and only) line:
1. Value of the shear stiffness of the section in the first direction, .
2. Value of the shear stiffness of the section in the second direction,
.
3. Value of the coupling term in the shear stiffness of the section,
.
If either value
or is omitted or given as zero, the nonzero value will be used for both.
19.12–1
ABAQUS Version 6.1 Module:
ID:
Printed on: