Two-Way Radio User Manual

*
VIEWFACTOR OUTPUT
21.2
*
VIEWFACTOR OUTPUT: Write radiation viewfactors to the results file in cavity
radiation heat transfer analysis.
This option is used to write cavity radiation element viewf actor matrices to the results file. This option is
available only for heat transfer analysis including cavity radiation.
Product: ABAQUS/Standard
Type: History data
Level: Step
References:
•
“Cavity radiation,” Section 32.1.1 of the ABAQUS Analysis User ’s Manual
•
“Output,” Section 4.1.1 of the ABAQUS Analysis User’s Manual
Required parameter:
CAVITY
Set this parameter equal to the name of the cavity for which this output request is being made.
Optional parameter:
FREQUENCY
Set this parameter equal to the output frequency, in increments. The output will always be written
at the last increment of each step unless FREQUENCY=0. The default is FREQUENCY=1. Set
FREQUENCY=0 to suppress the o utput.
There are no data lines associated with this option.
21.2–1
ABAQUS Version 6.1 Module:
ID:
Printed on: