Two-Way Radio User Manual

*
INTEGRATED OUTPUT SECTION
9.21
*
INTEGRATED OUTPUT SECTION: D efine an integrated output section over a surface
with a local coordinate system and a reference point.
This option is used to associate a surface with a coordinate system and/or a reference node to track the average
motion of the surface. It can also be used in conjunction with an integrated output request to obtain output of
quantities integrated over a surface.
Product: ABAQUS/Explicit
Type: Model data
Level: Part, Part instance, Assembly
References:
•
“Integrated output section definition,” Section 2.5.1 of the ABAQUS Analysis User’s Manual
•
“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User’s Manual
• *
INTEGRATED OUTPUT
• *
SURFACE
Required parameters:
NAME
Set this parameter equal to a label that will be used to refer to the integrated output section.
SURFACE
Set this parameter equal to the name of the surface (see “Defining elem ent-based s urfaces,”
Section 2.3.2 of the ABAQUS Analysis User’s Manual) to be associated with the integrated output
section.
Optional parameters:
ORIENTATION
Set this parameter equal to the nam e of an orientation definition (“Orientations,” Section 2.2.5 of
the ABAQUS Analysis User’s Manual) to define the initial coordinate syste m for the section. This
initial system can be further modified by using the PROJECT ORIENTATION parameter.
If this parameter is omitted, th e global coordinate system is used.
POSITION
This parameter is relevant only if the REF NODE parameter is included.
Set POSITION=INPUT (default) if the location of the r eference node is to be defin ed by the
user.
9.21–1
ABAQUS Version 6.1 Module:
ID:
Printed on: