Two-Way Radio User Manual

*
INTERACTION OUTPUT
9.22
*
INTERACTION OUTPU T: Specify spot weld interaction variables to be writte n to the
output database .
This option is used to write spot weld interaction variables to the output database. It must be used in
conjunction with the
*
OUTPUT, HISTORY option .
Products: ABAQUS/Standard ABAQUS/Explicit
Type: History data
Level: Step
References:
•
“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User’s Manual
•
“Mesh-independent fasteners,” Section 28.3.4 of the ABA QUS Analysis User ’s Manual
• *
OUTPUT
Required, mutually exclusive parameters:
NAME
Set this parameter equal to the name of the s pot weld interaction for which this output request is
being made.
NSET
Set this parameter equa l to the name of the node set for which this output request is being made.
Data lines to request spot weld interaction output to the output database:
First line:
1. Specify the identifying keys for the output variables to be written to the out put database.
The keys are defined in “ABAQUS/Standard output variable identifiers,” Section 4.2.1 of
the ABAQUS Analysis User’s Manual, and “ABAQUS/Explicit output variable identifiers,”
Section 4.2.2 of the ABAQUS Analysis User’s Manual.
Repeat this data line as often as necessar y to define the list of var iables to be written to the output
database.
9.22–1
ABAQUS Version 6.1 Module:
ID:
Printed on: