Two-Way Radio User Manual

*
INTERACTION PRINT
9.23
*
INTERACTION PRINT: Define print requests for spot weld interaction variables.
This option is used to provide tabular pri nted output of spot weld interaction variables.
Product: ABAQUS/Standard
Type: History data
Level: Step
References:
•
“Output to the data and results files,” Section 4.1.2 of the ABAQUS Analysis User’s Manual
•
“Mesh-independent fasteners,” Section 28.3.4 of the ABA QUS Analysis User ’s Manual
Optional, mutually exclusive parameters:
NAME
Set this parameter equal to the name of the s pot weld interaction for which this output request is
being made.
NSET
Set this parameter equa l to the name of the node set for which this output request is being made.
Optional parameters:
FREQUENCY
Set this parameter equal to the output frequency, in increments. The default is FREQUENCY=1.
Set FREQUENCY=0 to suppress the output. The output will always be printed at the last increment
of each step unless FREQUENCY=0.
SUMMARY
Set SUM MARY=YES (default) to obtain a summary of the maximum and minimum values in each
column of the table and their locations. Set SUMMARY=NO to suppress this sum mary.
TOTALS
Set TOTALS=YES to print the total of each colum n in the table. The default is TOTALS=NO.
9.23–1
ABAQUS Version 6.1 Module:
ID:
Printed on: