Two-Way Radio User Manual

*
ITS
9.25
*
ITS: D efine properties for IT S elements.
This option is used to define the properties for ITS-type elements. The
*
DASHPOT,
*
FRICTION, and
*
SPRING options must immediately follo w this option.
Product: ABAQUS/Standard
Type: Model data
Level: Part, Part instance
References:
•
“Rigid surface contact elements,” Section 31.5.1 of the ABAQUS Analysis User’s Manual
• *
DASHPOT
• *
FRICTION
• *
SPRING
Required parameter:
ELSET
Set this parameter equal to the n ame of the element set c ontaining the ITS-type elements for whic h
properties are being defined.
Data line for ITSUNI elements:
First (and only) line:
1. Tube outside diameter.
2. Distance between the parallel support plates on opposite sides of the tube.
3. X-direction cosine of the axis of the tube.
4. Y-direction cosine of the axis of the tube.
5. Z-direction cosine of the axis of the tube.
6. X-direction cosine of the normal to either one of the support plates.
7. Y-direction cosine of the normal to either one of the suppor t plates.
8. Z-direction cosine of the normal to either one of the support plates.
Data line for ITSCYL elements:
First (and only) line:
1. Tube outside diameter.
9.25–1
ABAQUS Version 6.1 Module:
ID:
Printed on: