User Manual
Manuals
Brands
3d hobby shop Manuals
Aircrafts
Extra 300 SHP V3 (Blue White Black)
11
12
13
14
15
16
17
18
19
20
Table Of Contents
Assembly Manual / Airframe – 47” Extra SHP
SAFETY in Assembly
SAFETY in Flying
Limits of Responsibility
Required Items
Assembly Instructions – Read completely before starting assembly!
UNPACK :
WRINKLES :
PAINT:
Control Throws and Exponential
Setting appropriate control throws is a critical step in matching your model to your flying style. Personally, I use two different flight “modes”– precision and 3D. Depending upon your radio, you may be able to combine all three dual rate functions onto a single switch, which is the technique I use. Regardless, be sure to use a common assignment scheme to prevent being in the wrong rate at the wrong time. I prefer my switches to be higher for high rates and lower for low rates, but virtually any combination will work – just be comfortable with your setup.
Apply
two large
drops
of thin
CA glue
to each el
evato
r hinge.
Allo
w
to soak in and
cure.
Do not use any
acc
elerat
or on this
glue, allow
the
g
lue to f
ully soak in.
Remove
coverin
g over slot
in bottom of
r
udder
as shown.
1
...
...
9
10
11
12
13
...
...
22
