User Manual

ManualsBrands3d hobby shop ManualsAircraftsExtra 300 SHP V3 (Blue White Black)

Table Of Contents

Assembly Manual / Airframe – 47” Extra SHP
Control Throws and Exponential
- Setting appropriate control throws is a critical step in matching your model to your flying style. Personally, I use two different flight “modes”– precision and 3D. Depending upon your radio, you may be able to combine all three dual rate functions onto a single switch, which is the technique I use. Regardless, be sure to use a common assignment scheme to prevent being in the wrong rate at the wrong time. I prefer my switches to be higher for high rates and lower for low rates, but virtually any combination will work – just be comfortable with your setup.

The cowl mounts using 4 small wood screws which screw through the cowl into small plywood

rectangles at the front of the fuselage. In order to know where to make the holes in the cowl for the

screws, place tape strips on the fuselage over the plywood as shown.

Install cowl and align, use tape to hold the cowl in position while you work. Use the tape strips to

locate the position for the holes in the cowl. Use a small drill or a hobby knife to make holes in the

cowl.