User Manual

Limits of Responsibility
3D Hobby Shop provides high-quality aircraft and components to it's customers
and end users. These aircraft and components are assembled by the end user
to produce a flying model. It is beyond 3D Hobby Shop's control to monitor the
end user's completed aircraft. Therefore, 3D Hobby Shop in no way accepts or
assumes responsibility or liability for damages resulting from the end user
assembled product. The end user assumes all responsibility and liability in use
of 3D Hobby Shop aircraft and components and agreeing to hold harmless 3D
Hobby Shop, it's distributors and dealers.
Required Items
Hobby Knife
Small Phillips Screwdriver
Set Metric Allen Wrenches
Scissors
Small Pliers
Wire Cutters
Adjustable wrench
Masking tape
Drill and drill bits
Threadlocker (Blue Loctite)
Optional:
Heat gun and covering iron
Dremel tool
Assembly Instructions – Read completely before starting assembly!
UNPACK :
Unpack your airplane and examine the components. Check for damage of any kind. If you have
damage, please contact 3DHobbyShop to discuss. Contact info listed above.
WRINKLES :
Your airplane was packed in plastic at the factory without any wrinkles in the covering. You may
notice some wrinkles now; more likely, you will notice a few in a day or two or the first time you take
the plane out to the flying field. These wrinkles are the result of wood shrinkage and/or expansion.
Balsa wood changes size and shape slightly as it is exposed to varying humidity in the air. This is a
natural property of balsa wood. As your airplane adjusts to the weather in your part of the world,
wrinkles may appear and disappear. Wrinkles may be removed with the gentle application of heat to
the covering material on your airplane. The best tools to use are a heat gun and covering iron. Apply
the heat gently: the covering material will shrink as you apply the heat, and this will remove the
wrinkles. BE CAREFUL! Too much heat applied too quickly can damage the covering, either by