User Manual

causing it to pull away from the wood at seams and corners or even by melting it. The covering will
shrink at low temperature with patient application of heat. Wrinkles in the covering DO NOT affect
flight performance. If you must shrink on a color-seam, use the iron and go slowly and carefully to
avoid any pulling or lifting at the seam.
Remove the canopy before attempting to use heat on your covering! The canopy is made of thermo-
activated plastic and WILL deform with the application of heat. Do not apply heat to the canopy.
PAINT:
If you need to clean your airplane, we recommend using a damp towel. The paint used on the canopy
and cowl is not safe for all cleaners. In particular, DO NOT use alcohol on these parts, it will remove
the paint.
NOTE: 3DHobbyShop has online build videos for this aircraft hosted at
www.vimeo.com and linked on the 3DHobbyShop website. If you have problems
locating the build videos, contact 3DHobbyShop for assistance or consult
www.RCGroups.com for the latest information on build videos and other news about
the 47” Extra SHP.
Let's get started!
Attach landing gear to fuselage using two 3mm allen-head screws (the two shortest screws in your kit). Use
blue Loctite on these screws.
Attach landing gear cover plate. For permanent installation, use medium CA glue. To be able to easily
access landing gear screws, use clear tape to attach plate.