User's Manual

User Manual
FireCR
4.2. Operation Conditions
Indoor use only
Operating Temperature
0°C ~ 35°C (32°F ~ 95°F)
Temperature Gradient
0.5°C / Min
Relative Humidity 15% ~ 95% (non-condensing)
Storage Temperature
- 10°C ~ 50°C (14°F ~ 122°F)
Storage Humidity 15% ~ 95% (non-condensing)
Storage Atmospheric Pressure 500 ~ 1,060 hPa
Transportation Temperature
- 10°C ~ 50°C (14°F ~ 122°F)
Transportation Humidity 15% ~ 95% (non-condensing)
Transportation Atmospheric Pressure 500 ~ 1,060 hPa
Installation Category II
Pollution Degree 2
Ingress of Liquids IPX0
Altitude Up to 2,000m
Protective Class Class 1
Equipment Maintenance No user maintenance is required and no user
service is allowed. Please contact technical
support if there is a problem.
Cleaning Do not try to clean inside of the scanner.
Wipe outside of the scanner for dust removing
with soft and dry cloth.
DANGER
There are no user serviceable parts inside the scanner. The
scanner should only be opened and serviced by qualified service
personnel. Failure to heed this warning may result in injury to
service personnel or damage to equipment, and void any and all
warranties. If there is a service problem, please contact 3D
Imaging & Simulations Corp. or authorized dealer.
26