User's Manual

User Manual
FireCR Dental TM-801-EN
24
4.2. Operation Conditions
Indoor use only
Operating Temperature
15°C ~ 30°C (59°F ~ 86°F)
Temperature Gradient
0.5°C / Min
Relative Humidity 15% ~ 95% (non-condensing)
Storage Temperature
- 10°C ~ 50°C (14°F ~ 122°F)
Storage Humidity 15% ~ 95% (non-condensing)
Storage Atmospheric Pressure 500 ~ 1,060 hPa
Transportation Temperature
- 10°C ~ 50°C (14°F ~ 122°F)
Transportation Humidity 15% ~ 95% (non-condensing)
Transportation Atmospheric Pressure 500 ~ 1,060 hPa
Installation Category II
Pollution Degree 2
Ingress of Liquids IPX0
Altitude Up to 2,000m
Protective Class Class 1
Equipment Maintenance No user maintenance is required and no user
service is allowed. Please contact technical
support if there is a problem.
Cleaning Do not try to clean inside of the reader.
Wipe outside of the reader for dust removing
with soft and dry cloth.
WARNING
There are no user serviceable parts inside the reader. The
reader should only be opened and serviced by qualified service
personnel. Failure to heed this warning may result in injury to
service personnel or damage to equipment, and void any and all
warranties. If there is a service problem, please contact 3D
Imaging & Simulations Corp. or authorized dealer.