User's Manual

User Manual
FireCR Dental TM-801-EN
25
4.3. Operating Instructions
4.3.1. Turn on the Reader
Turn on the reader. Power switch is on the rear side of the reader.
4.3.2. Turn on the Computer
Turn on the computer. Acquisition and Diagnostic Software must be installed before operate
the reader.
4.3.3. Imaging Plate Placement and Removal
Place the imaging plate on the tray to start scan. The imaging plate can be removed when
scanning and erasing are completed. Gently pull up the imaging plate.
Figure 7. Imaging Plate Placement and Removal
D
ANGER
This device uses laser. Avoid looking inside of the reader.
W
ARNING
Do not place the imaging plate in wrong direction or upside down
when it is being placed on the tray.
Tray