User's Manual

User Manual
FireCR Dental TM-801-EN
36
6.4. Shipping
The FireCR Dental Reader is a solidly built system designed to survive shipping around the
world. However, in order to avoid damage during shipping, the FireCR Dental Reader must
be properly packaged.
In general, the best way to package the FireCR Dental Reader is in the original factory
container. If this is no longer available, we recommend that user carefully wraps the FireCR
Dental Reader in at least 75 mm (3 inch) of foam or bubble pack sheeting. The wrapped
device should then be placed in a sturdy cardboard carton. Mark the outside of the box with
word FRAGILE and an arrow showing which way is up.
We do not recommend using loose foam pellets to protect the FireCR Dental Reader. If the
carton is dropped by the shipper, there is a good chance that the device will shift within the
loose pellet packing and be damaged.
If user needs to ship the FireCR Dental Reader to another location, or back to the factory, and
user does not have a means to adequately package it, user can order additional shipping
container. This may seem an expense user would like to avoid, but it is inexpensive compared
to the cost of repairing an instrument that has sustained shipping damage.
It is user’s responsibility to package the system properly before shipping. If the packaging is
inadequate, and the system is damaged during shipping, the shipper will not honor user’s claim
for compensation.