User's Manual

User Manual
FireCR Dental TM-801-EN
4
Warnings and Used Symbols
To ensure the safety of patients, staff and other persons, any changes to software and hardware
delivered by 3D Imaging & Simulations Corp. may only be made with prior written permission
from 3D Imaging & Simulations Corp.
Please read the respective manuals of the connected software, such as acquisition and
diagnostic software, before starting to use the FireCR Dental system.
The following symbols will be used throughout this manual:
D
ANGER
The functionality of the system can be destroyed in the case of
incorrect use.
If unauthorized changes have been made to delivered system and
accessories, the warranty by 3D Imaging & Simulations Corp.
becomes void. 3D Imaging & Simulations Corp. will not accept
any responsibility or liability for the improper functioning of the
product in such a case.
W
ARNING
The functionality of the system can be limited in the case of
incorrect use. Hints that require special attention.
N
OTE
Notes represent information that is important to know but which do
not affect the functionality of the system.
D
ANGER
This equipment is indoor use only and all the communication
wirings are limited to inside of the building.