User's Manual

User Manual
FireCR Spark TM-701-EN
15
3.3. Identify Important Features
Look over the reader and features shown in this section. User will need to know where these
features are when user operates the reader in later chapters.
3.3.1. Reader Connecting Part
3.3.2. Reader Reset Button
In case that the reader is stuck during scanning, push reader reset button by sharp pin to
initialize the reader.
WARNING
3D Imaging & Simulations Corp. is not liable for product damage or
personal injury when the user fails to follow the product installation
instruction.
WARNING
Pulling, pushing, or climbing on the system may cause the system
fall.
WARNING
Do not push scanner reset button during scanning.