User's Manual

User Manual
FireCR Spark TM-701-EN
31
6.4. Shipping
The FireCR Spark is a solidly built system designed to survive shipping around the world.
However, in order to avoid damage during shipping, the FireCR Spark must be properly
packaged.
In general, the best way to package the FireCR Spark is in the original factory container. If
this is no longer available, we recommend that user carefully wraps the FireCR Spark in at
least 75 mm (3 inch) of foam or bubble pack sheeting. The wrapped device should then be
placed in a sturdy cardboard carton. Mark the outside of the box with word FRAGILE and an
arrow showing which way is up.
We do not recommend using loose foam pellets to protect the FireCR Spark. If the carton is
dropped by the shipper, there is a good chance that the device will shift within the loose pellet
packing and be damaged.
If user needs to ship the FireCR Spark to another location, or back to the factory, and user does
not have a means to adequately package it, user can order additional shipping container. This
may seem an expense user would like to avoid, but it is inexpensive compared to the cost of
repairing an instrument that has sustained shipping damage.
It is user’s responsibility to package the system properly before shipping. If the packaging is
inadequate, and the system is damaged during shipping, the shipper will not honor user’s claim
for compensation.