User's Manual

User Manual
Fire ID TM-801-EN
9
Chapter 2. Unpacking
2.1. Inspection for Damage
Fire ID is shipped in a custom designed box to protect the reader from external shock. Before
unpacking the reader, inspect the shipping box for damage. In case the box is damaged, notify
the shipper immediately.
2.2. Identify the Components
Open the shipping container and identify each of these components.
Part No. Item
CR-FP-51-001
Fire ID
CR-FPA-02-004 USB Mini 5pin cable
WARNING
Improper disposal of this product may result in environmental
contamination. When disposing of this equipment, contact 3D
Imaging & Simulations Corp.’s representative or related organs
of government. Do not dispose of any part of this equipment
without consulting a 3D Imaging & Simulations Corp.’s
representative first.
3D Imaging & Simulations Corp. does not assume any
responsibility for damage resulting from disposal of this equipment
without consulting 3D imaging & Simulations Corp.
WARNING
Use the device passed IEC60950-1 or IEC60601-1 for the product
connected via USB port.
WARNING
If the Fire ID needs to be returned to manufacturer or one of its
representatives, the reader must be repacked in the original box
with all accessories.