User's Manual

User Manual
FireCR Flash TM-401-EN
34
6.4. Shipping
The FireCR Flash is a solidly built system designed to survive shipping around the world.
However, in order to avoid damage during shipping, the FireCR Flash must be properly
packaged.
In general, the best way to package the FireCR Flash is in the original factory container. If this
is no longer available, we recommend that user carefully wraps the FireCR Flash in at least 75
mm (3 inch) of foam or bubble pack sheeting. The wrapped device should then be placed in a
sturdy cardboard carton. Mark the outside of the box with word FRAGILE and an arrow
showing which way is up.
We do not recommend using loose foam pellets to protect the FireCR Flash. If the carton is
dropped by the shipper, there is a good chance that the device will shift within the loose pellet
packing and be damaged.
If user needs to ship the FireCR Flash to another location, or back to the factory, and user does
not have a means to adequately package it, user can order additional shipping container. This
may seem an expense user would like to avoid, but it is inexpensive compared to the cost of
repairing an instrument that has sustained shipping damage.
It is user’s responsibility to package the system properly before shipping. If the packaging is
inadequate, and the system is damaged during shipping, the shipper will not honor user’s claim
for compensation.