... print your plane | www.3DLabPrint.com User Guide rev. 2021/12 Fully 3d printable Mitsubishi A6M2 Zero scale 1:12, wingspan 1000 mm / 39.
... print your plane | www.3DLabPrint.com A6M2 Zero fully printable R/C plane for your desktop 3Dprinter Fully 3D printable RC model of the Japanese attack plane, specially designed to meet ACES and EPA aircombat requirements, but also as a cheap and easy to build RC model for everyday flying. Many scale details such as armament or airframe plating encourages to create realistic paint jobs. This plane has been designed for printing from PolyLight 1.
... print your plane | www.3DLabPrint.com General specifications (HP setup): Wingspan: Lenght: Height: Wing area: Wing loading: Center of gravity: Airfoil: Print weight (LW PLA): Empty weight (w/o battery): Takeoff weight (3s 1300 lipo): Max takeoff weight: Never exceed speed, VNE: Design maneuvering speed, VA: Stall speed, VS: 1000 mm / 39.4 inch 726 mm / 28.5 inch 188 mm / 7.4 inch 18,3 dm2 / 1.96 square feet 31 g/dm2 / 15.
... print your plane | www.3DLabPrint.com Mitsubishi A6M2 Zero (rei-shiki-kanjō-sentōki), History The Mitsubishi A6M „Zero“ was a long-range carrier-based fighter aircraft formerly manufactured by Mitsubishi Aircraft Company, a part of Mitsubishi Heavy Industries, and operated by the Imperial Japanese Navy from 1940 to 1945. The A6M was designated as the Mitsubishi Navy Type 0 carrier fighter.
... print your plane | www.3DLabPrint.com Included: 1. 3MF 3D files (primary) Used instead of STL files 3mf files can be used instead of standard STL files, but also include information about slicing in the new version of Prusa Slicer (since version 2.4). Open them directly in the Prusa Slicer as a project or import to the slicer of your choice. The files contain settings for printing on a direct drive printer with dimensions 200x200x200 mm, that can be further adapted to suit your printer.
... print your plane | www.3DLabPrint.com 5. Scale markings PDF You could print and cut the PDF in scale from thin self adhesive advertisement foil and place it on the model as needed.
... print your plane | www.3DLabPrint.com A6M2 Zero Centre of Gravity Wing area: 18,3 dm2 / 1.96 square feet Lenght: 726 mm / 28.
... print your plane | www.3DLabPrint.com Wing span: 1000 mm / 39.
... print your plane | www.3DLabPrint.com Step By Step PDF/VIDEO userguide 1. Choose airplane at www.3Dlabprint.com, visit our Facebook for latest info. Basic requirments for A6M2 Zero are 200/200/195 mm volume, nozzle 0.4mm recommended (0.35 or 0.5mm alternativelly). Heated bed recommended. Designed to be printed with Polylight LW-PLA filament by 3DLabPrint. Contact: support@3dlabprint.com 2.
... print your plane | www.3DLabPrint.com option B Factory files Simplify3D: We prepared all you need in these files (FFF process settings, parts layout on bed, etc...) You can use these settings as a start point. Adjust according to your need (adapt for your printer), print single parts and so on... Most 3d printers should work just with these settings, but please go through the settings and amend if necessary, we are not liable for any damage resulting from using our settings.
... print your plane | www.3DLabPrint.com option D CURA or MatterControl MatterControl and CURA are free and provide satisfactory results. The airframe is still strong enough, but don‘t expect the best quality. Both slicers lacks some very useful features, and finer settings, like multiple processes according to Z height, retraction options, layer start, etc. Please try to find the best extrusion multiplier and temperature for good weight and best possible layer bonding.
... print your plane | www.3DLabPrint.com 4. Print it Save the Gcodes to the SD card and insert into your printer. Prepare your printer and start printing, we prefer to use SD card rather than direct USB connection. Scaling the model will lead to unusable result! you will need: LW-PLA filament - (Polylight LW-PLA) 3DLac, Strong hair spray, PEI or your favorite adhesive bed surface Razor blade AND...
... print your plane | www.3DLabPrint.com Enjoy the fun together! A6M2 Zero is the next of new LW Planes series designed for easy and cheap flying. The build is simple even for a beginner. It’s very low weight, easy assembly and fantastic flight characteristics makes this model an ideal plane for beginner RC pilots. Very suitable for dads and kids. Children will learn some modern building skills and technology and most of all have fun. This is the reason, why every dad should have a 3D printer at home.
... print your plane | www.3DLabPrint.com How to print PolyLight LW-PLA? The basic print setup is almost the same as we use for standard PLA. The only difference is in extrusion multiplier set to 0.5 and turning off the retractions completely. This results in parts with half the weight and still suitable mechanical properties, this model is designed mainly in VASE mode, even that expect some stringing inside and outside in some inpossible spots.
... print your plane | www.3DLabPrint.com 5. Assembly of printed parts 5.1 Wing assembly A6M2 Zero Glue wing parts L1-L4 perfectly together. The new 3DLabPrint lock system will help you. Repeat for the right side. Glue both halves of the wing together. Use the CA glue, (position locks and wing pins will help you to align the parts), and use activator to speed up the glue curing. Press in and glue a piece of PolyAir, PLA or 1.
... print your plane | www.3DLabPrint.com 5.2.1 Fuselage assembly A6M2 Zero You can use snap knife for cleaning the surface of printed parts, but mostly it is not necessary. Glue fuselage parts F1-F4 with CA glue together. The new 3DLabPrint lock system will help you. Check the alignment of F4 part compared to the wing before glueing. Do not glue rudder part before tail and elevator assembly. Use any hot tool to remove the unnecessary material from F4 tail part for the elevator arm.
... print your plane | www.3DLabPrint.com funkce inovace 5.2.2 Fuselage tail - elevator pushrods and servos Glue L1 and L2 parts of the stabilizer and elevator. The profile is symmetric, so the left and right sides are identical. Glue the stabilizers perfectly perpendicular to the fuselage. Assemble both sides of the elevator with the elevator control lever on a flat surface. Make a Z bend on the elevator 0,8 mm pushrod wire.
... print your plane | www.3DLabPrint.com 6. Servo installation Cut loose the servo holder ears on aileron servos. Install the prepared servos to wing servo bays. Use a 1mm steel wire with Z bends as a linkage between the servos and aileron control horns. Elevator servo will be fixed by screws directly to the fuselage. Video guide A6M2 ZERO Servos you will need: 3x HXT900, or similar 23x12x26 mm Snap knife, Z pliers CA Glue + activator or Hot Glue 7.
... print your plane | www.3DLabPrint.com 8. Final assembly/setting Refer to your R/C system userguide for setup information. Video guide A6M2 ZERO Final Setting you will need: Your own Rx/Tx system (refer to your R/C system userguide for setup) 4x rubber bands Install your reciever, connect battery, setup servos and etc. with your trasmitter, check servo position, then install propeller, the supplied spinner guarantees proper cooling of the motor and mount.
... print your plane | www.3DLabPrint.com 10. Pilots Please Attention! For the first flights we recommend setting the center of gravity to around 5 mm forward of the CG tag - nose heavy, this increases the stability (you can use heavier battery). Increasing expo settings on your transmitter for elevator and ailerons to 80 % calms response from your stick inputs. Also you can decrease elevator and ailerons deflection to calm down the plane. Make sure the battery is well fixed in proper possition.
... print your plane | www.3DLabPrint.com Shopping list A6M2 ZERO: Printing material: 0,25 kg of Polylight LW-PLA a few of PolyAir PLA or PETG filament Motor: any 2830 size motor for 3S Li-Pol with weight up to 70g Propeller: GWS 9 x 7,5 (ugly orange) or any 9x6 ESC: any 20A/3s Brushless Speed Controler + connector XT60 Battery: any 1500mAh / 3s, 140-160g Servos: 3x HXT900, or similar 23x12x26 mm Glue: CA Glue - medium Activator for CA Glue Other: 0.75m of 0.8-1.
