... print your plane | www.3DLabPrint.com User Guide Fully 3d printable Messerschmitt Bf 109 T scale 1:12, wingspan 978mm (38.5in) page 1 rev.
... print your plane | www.3DLabPrint.com 3D Lab Print Messerschmitt Bf 109 T – fully printable R/C plane for your home 3Dprinter Future of flying - Print your own plane We still trying move things further, so this project is again full of other improvements for better durability , easier assembly , better geometry solution and so on...
... print your plane | www.3DLabPrint.com General specifications Me 109 T Lenght: Wingspan: Height: Wing area: Wing loading: Airfoil: Print weight: Takeoff weight (6s 1300 lipo): Max takeoff weight: Never exceed speed, VNE: Design maneuvering speed, VA: Stall speed, VS: Powerplant Propeller: Motor: ESC: Battery: 771mm, 30.35in 978mm, 38.5in 170mm, 6.7in 17.5 dm2 51.0 g/dm2 aircombat modificated 410g(14.5oz) 821g(28.9oz) 960g(33.8oz) 205km/h 165km/h 33km/h aeronaut ELP 9/6 or APC 9/6 – 9/7.
... print your plane | www.3DLabPrint.com Messerschmitt Bf 109 T, History The Messerschmitt Bf 109, commonly called the Me 109 (most often by Allied aircrew and even amongst the German aces themselves, even though this was not the official German designation), is a German World War II fighter aircraft designed by Willy Messerschmitt and Robert Lusser during the early to mid-1930s.
... print your plane | www.3DLabPrint.com Included: 1.STL 3d files universal STL files designed for use with desktop FMD 3d printers and slicer software as Simplify3D (recommend) CURA or MatterControl (this STLs are not compatible with Slic3r). 2.
... print your plane | www.3DLabPrint.com 5.Prepared settings for CURA and MatterControl slicers If you dont like Simplify3D for any reason, there is always possibility to use another free slicer you can use our basic setting (setting files) as a start point and edit it as you need. 6.Scale markings PDF Let print on thin adhesive foil and place on the model as needed, violet cut lines included... Messerschmitt Bf 109 – 1:12 7.Stand If you need this plane just for decorative or demonstrative reason...
... print your plane | www.3DLabPrint.com 771mm(30.
... print your plane | www.3DLabPrint.com T version 978mm(38.
... print your plane | www.3DLabPrint.com Step By Step PDF/VIDEO userguide 1. Choose airplane at www.3Dlabprint.com, our Facebook for live information... Basic requirments (Me 109 T ): min volume 195/195/150mm (250/120/150) nozzle 0.4mm recommended (0.35 or 0.5mm alternatively) Heated Bed recommended PLA filament (or PETG, APLA, htPLA, PC-max....) not ABS If you feel a little bit confused you can download wing test part from our websites or thingiverse, (the biggest part). Or contact support@3dlabprint.
... print your plane | www.3DLabPrint.com options B Factory files Simplify3D (recommended) We prepare all you need in this files (basic FFF, parts arranged and so on...) You can use this our setting as a start point and edit it as you need (adapt it for your printer), print only parts you need and so on... On moust 3d printers it should work as it is, but please give a look to the setting and edit it if is different to your printer, we are not liable for damages resulting from the use of our settings.
... print your plane | www.3DLabPrint.com options D CURA or MatterControl MatterControl and CURA are free :-) and also gives very good results and airframe is still strong enough, slicer setting is very easy. Please try find right extrusion multiplier and temperature for good weight and bets layer bonding, give a look to parts weight list for proper multiplier setting.
... print your plane | www.3DLabPrint.com 4. Print it Save generated Gcodes and insert SD card to your printer, prepare your printer and start printing, we prefer to use SD than direct connection via USB Note: ABS filament is not suitable for this... Scaling the model will lead to unusable result! video guide about printing you will need: PLA filament - good quality and strong PLA (we need good layer bonding) Strong hair spray (or your favorite adhesive bed surface) Razor blade AND...
... print your plane | www.3DLabPrint.com Basic Typs and Advices Plese Experiment with your extrusion multiplier... Also HotEnd temperature is very important for strong result, please try increase temperature to find the best value (200 up to 260 celsius) Turn OFF cooling fan for better layer adhesion (HE fan of course ON) we dont need it for our thin wall printing... We try lot of filaments and so far PLA is still the best for our models (2016).
... print your plane | www.3DLabPrint.com 5. Assembling printed parts 5.1 Wing assembling Glue wing parts with CAglue together, use activator and instal ailerons... See video guide #4 you will need: CA Glue - medium or similar medium viscosity CA glue Activator for CA Glue or similar, but not-mechanical is better AC Hinge Sheet or similar Scissors Snap knife Some cloth for wiping CA glue... 5.
... print your plane | www.3DLabPrint.com 6. R/C equipment 6.1 motor setup HIGH PERFORMANCE SETUP (if you like it hot, yeah)prop 9/6, 9/7 fast: See video guide #6 (for HP setup) you will need: Motor – AX-4008Q-620KV Speed controler (ESC) – CC Talon 25 or similar 25A/6s 3x PAIRS, 3.
... print your plane | www.3DLabPrint.com 7. R/C Equipment instaling Instal prepared RC equipment: Motor, ESC, Servos... Nose and motor mount are already in angle for compensating rotating propeller stream. See video guide #8 you will need: Printed motor mount, find the one that fits for your motor... 2-4x Screw 3/12-30mm depends on motor-mount Small screwdriver+ Your earlier prepared R/C equipment 3x Self Tapping Screw M3x8mm or similar 8.
... print your plane | www.3DLabPrint.com 10. Go flying Before flight check: center of gravity is very important (move it forward for the first flights see CG markings and chapter 11 bellow), battery properly charged, ailerons and elevator deflection check, your own flying skills or RC simulator training... Then go flying: set full throtle, put the elevator little upwards (1-2mm) and throw it energetically to the wind approx 10 grades up, wait till plane gain speed, then fly it in your manner...
