User Manual

page 11
... print your plane | www.3DLabPrint.com
Enjoy the fun together!
Bungee Prop is another of a new LW Planes
series designed for easy and cheap flying. The
build is simple even for a beginner. It’s very
low weight, easy assembly and fantastic flight
characteristics makes this model an ideal plane
for beginner RC pilots.
Very suitable for dads and kids. Children will learn
some modern building skills and technology and
most of all have fun. This is the reason, why every
dad should have a 3D printer at home.
This model has been completely designed with a
new LW PLA material by ColorFabb in mind.
Parts printed from this LW PLA are light, easily
sanded and glued together. This model requires
only about 220 g of this material, that means it’s a
very cheap build. In case of accident, parts can be
easily reprinted with just a filament cost.
We’ve been testing this material for half a year
before the first LW plane was released... The
material is using an active foaming technology
to achieve lightweight, low density PLA parts.
At around 230°C this material will start foaming,
increasing its volume by nearly 3 times.
All parts of this plane should be printed from LW-
PLA.
Note: check proper extrusion multiplier for each
part.
Bungee Prop
weights of printed parts
extrusion setting
fuselage LW PLA
F1 (extrusion m. 0.50) 11 g
F2 (extrusion m. 0.50) 22 g
F3 (extrusion m. 0.40) 12 g
F4 (extrusion m. 0.40) 7 g
F5 (extrusion m. 0.40) 6 g
F6 (extrusion m. 0.40) 8 g
wing
wing L1 (extr. m. 0.40) 17 g
wing L2 (extr. m. 0.40) 19 g
wing L3 (extr. m. 0.40) 14 g
wing R1 (extr. m. 0.40) 17 g
wing R2 (extr. m. 0.40) 19 g
wing R3 (extr. m. 0.40) 14 g
wing C (extr. m. 0.50) 12 g
tail
H stab. L1 (extr. m. 0.35) 9 g
H stab. L2 (extr. m. 0.35) 1 g
H stab. R1 (extr. m. 0.35) 9 g
H stab. R2 (extr. m.
0.35)
1 g
V stab. (extr. m. 0.35) 10 g
accessories
m. mount (extr. m. 0.5) 4 g
spinner (extr. m. 0.5) 4 g
all printed parts 216 g