User Manual

page 12
... print your plane | www.3DLabPrint.com
5. Assembly of printed parts
5.1 Wing assembly
Glue wing parts together. The new 3DLabPrint lock system will help you. Repeat for the right
side. Glue both halves of the wing together. Use the CA glue and activator to speed up the
glue curing.
See video guide #4
you will need: CA Glue medium viscosity + activator
Snap knife, some cloth for wiping CA glue...
wing L1
17g/0.6oz
wing L2
19g/0.67oz
wing L3
14g/0.49oz
wing C
12g/0.42oz