User Manual

page 4

... print your plane | www.3DLabPrint.com

Included:

1. STL 3d ﬁles

Universal STL ﬁles designed to be used with desktop FDM 3d printers and slicer software

as Simplify3D (recommended), CURA or MatterControl (these STLs are not compatible with

Slic3r).

2. Factory ﬁles for Simplify3D slicer - preered

Contains all the necessary settings to slice the models along with suggested bed layout. We‘re

using PRUSA i3 ORIGINAL printers so you may need to adjust the basic printing parameters

to match your printer or use these ﬁles as a start point for you. Please check the Simplify3D

3. Step By Step PDF/VIDEO userguides

Apart from this userguide, please see the Printing Guide to ﬁnd some Tips and Advice for

airplane printing (Thin Wall Printing).

4. Gcodes

Basic Gcodes prepared for direct use, as universal as possible. Should work on i3 style printers,

Give it a try, but we can‘t guarantee it will work on your printer.

5. Slice on your own with CURA or MatterControl slicers

If you for any reason don‘t like Simplify3D, there is always option to use another free slicer

Please follow our Cura guide in the Help section of the website where you can ﬁnd the basic

single-wall proﬁle. Remember: We use 0 retraction with LW-PLA and a continous vase mode.