User Manual

page 7
... print your plane | www.3DLabPrint.com
Step By Step PDF/VIDEO userguide
1. Choose airplane at www.3Dlabprint.com, visit our Facebook for latest info.
Basic requirments for Bungee Prop are 195/195/200 mm
volume, nozzle 0.4mm recommended (0.35 or 0.5mm
alternativelly). Heated bed recommended. Designed to be
printed with LW PLA filament.
Contact: [e-mail]
2. Create account, download
You will receive download link to all the zipped files to your email (please check your spam
folder if not) or you can log in to your account and download directly from our websites.
3. Gcodes preparing
option A Gcodes:
if your printer is i3 comptatible you can use prepared gcodes directly. Just save them to the
SD card and let the 3d printer do it‘s job. HE temperature is set to 250°C so the layers fuse
together well (with great foaming eect), you can adjust speed and temperature only through
your printer‘s LCD. If these Gcodes does not work for you, please proceed to the next options.