User Manual

6
Mounting
autopilot integration cable
The camera mounts to the Aero inside the battery compartment
and connects to the autopilot using the mini-USB cable. When the
camera is ready to start the mission, insert the camera into the
mount inside the battery compartment as shown below, connect
the mini-USB cable to the camera, and secure the camera in place
using the velcro strap.
Connect mini-USB cable inside
battery compartment here.
The camera mount includes a lens cap that protects the filter during
travel. Make sure to remove this lens cap before you fly, and check
that the filter contains no foam particles, dirt, or scratches that could
affect image quality.
It is expected that the filter will accumulate scratches after significant
use. If you notice any damage to the filter that could affect image
quality, unscrew the filter and replace with one of the extra filters
provided with the Aero.
UV filter
Aero battery compartment: camera mount
Camera (side)
Camera mount (bottom): cap removed
Camera mount (bottom): cap attached
The camera mount is fixed to the inside of the battery compartment
and is not intended to be removed from the Aero.