Instruction Manual

switch the mode. When the board is in programming mode, the blue LED will be solid. If the
Remzibi’s OSD 3DR board’s video output is hooked up to a screen, you will see the character set
currently on the board displayed on the screen.
Important note: The SW1 switch may not have the same functions if you are using firmware
versions other than the DIY Drones version firmware. The Status LED may also not have the
same function, or may not turn on at all, if you are using versions other than the DIY Drones
version firmware.
Meaning of the Status LED
Status LED
What it Means
Blinking
Remzibi’s OSD 3DR is in Normal Mode
Solid (after pressing SW1 and resetting)
Remzibi’s OSD 3DR is in Programming Mode