Instruction Manual

DIY Drones Mediatek GPS
The DIY Drones Mediatek GPS comes with custom DIY Drones firmware for use with the ArduPilot Mega
system. To use the Mediatek GPS with your Remzibi’s OSD 3DR, you will need to change the GPS
firmware to the factory default firmware.
What You Will Need
You can use the Remzibi’s OSD 3DR cable that came with your Remzibi’s OSD to connect your GPS to the
computer. You may need jumper cables and pins. You will also need to download the firmware update
utility available for free online here.
Connecting Your GPS to Your Computer
Connect your GPS to the Remzibi’s OSD 3DR Cable as shown. Notice that the orange and yellow lines are
crossed so that Orange cable in the Remzibi’s OSD 3DR Cable connects to “IN” and the yellow cable
connects to “OUT.”
Black
Red
Orange
Yellow
GND
5V
OUT
IN
Remzibi’s OSD 3DR Cable
How to connect Mediatek GPS to Remzibi’s OSD 3DR cable: