User Guide
Table Of Contents
-  Introduction
-  Important Safety Information
-  CubePro 3d Printer Features and Benefits
-  At a Glance
-  Specifications and Requirements
-  Unpacking and Setting up Your CubePro
-  Printing Your Creation
-  Finishing Your Creation
-  CubePro Software
-  Operation Procedures
-  CubePro Maintenance
- Restoring Roughness to the Print Pad
- Cleaning the Jet Wiper
- General Cleaning
- Adjusting the Jet Wiper Assembly
- Calibrating the Print Pad
- Calibrating the Z-Gap And Print Pad Level
- Calibrating the Offset Jets
- Calibrating the Wipe Function
- Testing the Print Jets and Extruders
- Moving the Print Jets
- Updating the CubePro Firmware
- Replacing Fuses
- Lubricating The Bearing Rods
- Error Codes
- Contacting Support
-  Cubify Sustainability Program
73D Systems, Inc.
5
SPECIFICATIONS AND REQUIREMENTS
DIMENSIONS AND WEIGHT
Weight and Dimensions
• 566.7 mm (w) x 581.0 mm (d) x 606.4 mm (h) (22 5/16” (w) x 22 7/8” (d) x 23 7/8” (h))
Unboxed:
• 41 kg (90.7 lbs.)
• 43 kg (94.3 lbs.) Duo
• 44 kg (98 lbs.) Trio
Boxed:
• Maximum: 58.97 kg (130 lbs.)
• Maximum: 59.87 kg (132 lbs.) Duo
• Maximum: 60.78 kg (134 lbs.) Trio
PC REQUIREMENTS
• Microsoft® Windows® 7 and above
• Multi-core processor - 2GHz or faster per core
• System RAM - 2GB
• Screen resolution - 1024 x 768 dpi
SOFTWARE
• CubePro Client Software - Available at www.cubify.com.
ELECTRICAL REQUIREMENTS
• 100-240V AC 50-60 Hz auto switching, 6A
MATERIAL STORAGE
Although all polymers degrade with time, the following conditions help ensure the quality of the material:
• Unpack the material only as needed
• Store the material at 18-29°C (65-85°F)
• Store the material enclosed in a dry environment (low humidity)
• Use within 12 months of receipt