User Guide

363D Systems, Inc.
CAD File Functions
Geometry Functions
A
Home Tab The main tab
B
Open Model Opens a .stl le
C
Open Model
Assembly
Opens a multi-part
assembly of .stl les
D
Close Closes an open .stl le
E
Close All Closes all open .stl les
F
Save As Saves the current .stl le
G
Single Color
Check the box if the model
will print using a single color
A B C D E F G
A
Movement
Geometry
Value Fields
Enter the appropriate values to
move the model.
B
Move X Button
Once a value has been entered,
select the button to move the
model left or right.
C
Move Y Button
Once a value has been entered,
select the button to move the
model forward or backward.
D
Auto Place
Auto Place the model to the center
of the print area.
E
Move Model
Once this button has been
selected, left click on the model
and drag it into position.
F
Scale Value
Field
Enter the scale percentage
G
- to mm
Scale the 3D model to the
millimeter value entered in the
eld.
H
+ to Inch
Scale the 3D model to the inch
value entered in the eld.
I
Scale
Scale the model by the specied
percentage.
J
Revert
Undo the scaling and revert back
to the original size.
K
Rotate
Geometry
Value elds
Enter values to rotate the model
L
X
Rotate the model front-to-back on
the X axis by the specied value.
M
Y
Rotate the model left and right on
the Y axis by the specied value.
N
Z
Rotate the model up and down on
the Z axis by the specied value.
O
Revert
Undo the applied rotation and
revert to the original position.
A
B
C D
E F G H I J K L M N O