User Guide
Table Of Contents
-  Introduction
-  Important Safety Information
-  CubePro 3d Printer Features and Benefits
-  At a Glance
-  Specifications and Requirements
-  Unpacking and Setting up Your CubePro
-  Printing Your Creation
-  Finishing Your Creation
-  CubePro Software
-  Operation Procedures
-  CubePro Maintenance
- Restoring Roughness to the Print Pad
- Cleaning the Jet Wiper
- General Cleaning
- Adjusting the Jet Wiper Assembly
- Calibrating the Print Pad
- Calibrating the Z-Gap And Print Pad Level
- Calibrating the Offset Jets
- Calibrating the Wipe Function
- Testing the Print Jets and Extruders
- Moving the Print Jets
- Updating the CubePro Firmware
- Replacing Fuses
- Lubricating The Bearing Rods
- Error Codes
- Contacting Support
-  Cubify Sustainability Program
383D Systems, Inc.
Print Paths
SETTINGS TAB
A
Show Print
Jet 1
Show print jet 1 print path
B
Show Print
Jet 2
Show print jet 2 print path
C
Show Print
Jet 3
Show print jet 3 print path
D
Show All
Layers
Show all the tool path layers
E
About
Software version and update
information link
A
Settings Tab Adjust the settings
B
Printer
Conguration
Set the printer type, number of
print jets and printer materials
C
Build Settings
View and select the build settings
used when creating the tool path
for the print le.
D
Firmware
Update
Update the printer rmware.
E
Printer
Connection
Setup a wireless connection with
the printer
A
B
C
D E
A
B C D E