User Guide
Table Of Contents
-  Introduction
-  Important Safety Information
-  CubePro 3d Printer Features and Benefits
-  At a Glance
-  Specifications and Requirements
-  Unpacking and Setting up Your CubePro
-  Printing Your Creation
-  Finishing Your Creation
-  CubePro Software
-  Operation Procedures
-  CubePro Maintenance
- Restoring Roughness to the Print Pad
- Cleaning the Jet Wiper
- General Cleaning
- Adjusting the Jet Wiper Assembly
- Calibrating the Print Pad
- Calibrating the Z-Gap And Print Pad Level
- Calibrating the Offset Jets
- Calibrating the Wipe Function
- Testing the Print Jets and Extruders
- Moving the Print Jets
- Updating the CubePro Firmware
- Replacing Fuses
- Lubricating The Bearing Rods
- Error Codes
- Contacting Support
-  Cubify Sustainability Program
393D Systems, Inc.
Printer Conguration
A
Printer Type Select your printer type
B
Print Jets
Set the number of print jets in your
printer
C
Print Jet 1
Material
Select the type and color of
material installed in cartridge bay 1
D
Print Jet 2
Material
Select the type and color of
material installed in cartridge bay 2
E
Print Jet 3
Material
Select the type and color of
material installed in cartridge bay 3
A
B
C
D
E