User Guide
Table Of Contents
-  Introduction
-  Important Safety Information
-  CubePro 3d Printer Features and Benefits
-  At a Glance
-  Specifications and Requirements
-  Unpacking and Setting up Your CubePro
-  Printing Your Creation
-  Finishing Your Creation
-  CubePro Software
-  Operation Procedures
-  CubePro Maintenance
- Restoring Roughness to the Print Pad
- Cleaning the Jet Wiper
- General Cleaning
- Adjusting the Jet Wiper Assembly
- Calibrating the Print Pad
- Calibrating the Z-Gap And Print Pad Level
- Calibrating the Offset Jets
- Calibrating the Wipe Function
- Testing the Print Jets and Extruders
- Moving the Print Jets
- Updating the CubePro Firmware
- Replacing Fuses
- Lubricating The Bearing Rods
- Error Codes
- Contacting Support
-  Cubify Sustainability Program
413D Systems, Inc.
Descriptions
Print Mode
Standard • Layer Resolution: 200um
• Print Strength: Strong
• Print Pattern: Diamonds
Premium • Layer Resolution: 70um
• Print Strength: Strong
• Print Pattern: Diamonds
Draft • Layer Resolution: 300um
• Print Strength: Strong
• Print Pattern: Lines
Custom Custom allows the user to customize their print settings
Print Resolution
0.070 • Great mode for parts requiring smooth surfaces
• Layer lines are not very visible in these parts
• Good mode for artistic parts with a smooth ow
• Not the best mode for ne detail
0.200 • Best mode for general printing and most compatible mode for a wide range of geometries
• Fine detail preservation for things like steeples, spires, sharp points, or thin walls
0.300 • A fast mode with thicker layers
• Good for large parts with minimal detail
Print Strength
Hollow • Fastest mode to produce a part
• Hollow has fewer outer surfaces and larger print pattern spacing
• Best for parts that will not be stressed
Strong • Medium amount of outer surfaces and smaller print pattern spacing
• Best for parts that will have minimal physical abuse
Almost Solid • The most surfaces and the tightest print pattern spacing
• The most robust part
• Best for parts that will be stressed
Print Pattern
Lines • Fastest print ll pattern
• Minimal cross bracing
Diamonds • Strong print pattern with 2-direction cross bracing
Honeycomb • Strong print pattern with 3-direction cross bracing