User Guide
Table Of Contents
-  Introduction
-  Important Safety Information
-  CubePro 3d Printer Features and Benefits
-  At a Glance
-  Specifications and Requirements
-  Unpacking and Setting up Your CubePro
-  Printing Your Creation
-  Finishing Your Creation
-  CubePro Software
-  Operation Procedures
-  CubePro Maintenance
- Restoring Roughness to the Print Pad
- Cleaning the Jet Wiper
- General Cleaning
- Adjusting the Jet Wiper Assembly
- Calibrating the Print Pad
- Calibrating the Z-Gap And Print Pad Level
- Calibrating the Offset Jets
- Calibrating the Wipe Function
- Testing the Print Jets and Extruders
- Moving the Print Jets
- Updating the CubePro Firmware
- Replacing Fuses
- Lubricating The Bearing Rods
- Error Codes
- Contacting Support
-  Cubify Sustainability Program
443D Systems, Inc.
Sidewalk Options
A sidewalk is a mesh boundary that prints around the outside diameter of the part. Its main purpose is to reduce the tendency of
warping especially when printing at parts with ABS material. They are not recommended for parts that have ne details.
Sidewalks are designed to easily break away from the part once it has been removed from the print pad.
NOTE: A sidewalk will not print under a part and will not ll holes or cavities within the border of the part.
A
Sidewalk Distance Set the distance the sidewalk extends beyond the border of the part.
B
Sidewalk Layers Set the number of layers that will be printed.
C
Sidewalk Offset Set the distance between the part and the sidewalk.
D
Sidewalk Perforation
Enabling this option will create a perforated intersecting line at the border of the part for easier
removal.
A
Part
Sidewalk
C