Cube 3 Quick Start Guide

Clean The Print Pad

1. Remove the print pad from the printer.

2. Wash all glue and print material from the print pad with warm tap water. If necessary, scrub the

print pad with a soft brush.

3. Dry the print pad thoroughly.

4. If residual print material is still adhered to the print pad, gently use the scraper to remove it. Refer

to the User Guide for more information.

5. If portions of the print pad appear shiny, buff the surface (with very light pressure on the included

sandpaper) left-to-right in .5” (12.7 mm) swirling motions until the entire print pad has been treated.

NOTE: It is most important to lightly sand all shiny parts of the print pad so the print

pad surface appears matte in texture.

6. Clean and dry the print pad thoroughly.

7. Reinstall the print pad with the Cube symbol (A) on the print pad oriented to the front and aligned

with the Cube symbol (B) on print platform.

8. Perform the Auto Level and Auto Gap Procedures.