Certifications 2

1
SAFETY DATA SHEET
3DXSTAT™ ESD-PLA
EFFECTIVE DATE: 08 / 01 / 2018 REVISION NUMBER: V1.0
1 PRODUCT AND SUPPLIER INFORMATION
Product Identification:
Product Name: 3DXSTAT™ ESD-:PLA
Chemical Name: Polylactic Acid Polymer (PLA]
Recommended Use: Additive manufacturing
Supplier Information:
3DXTECH
571 Gordon Industrial Court, Suite E
Byron Center, MI 49315 (USA)
Phone [phone]
Email: INFO@3DXTECH
Emergency Phone Number: [phone]
2 HAZARDS INDENTIFICATION
Regulation (EC) NO 1272/2008: Not classified as a dangerous product
Physical Hazards: None
OSHA Regulatory Status: This product is not considered hazardous by the 2012 OSHA Hazard Communication
Standard (29 CFR 1910.1200)
3 COMPOSITION/INFORMATION ON INGREDIENTS
Components
CAS No.
Concentration Range (%)
PLA Resin
9051-89-02
>90
Carbon Additives
1333-86-4
<10
4 EMERGENCY FIRST AID
Eyes: Flush with water. Consult physician if symptoms persist.
Skin Contact: Wash with soap and water. For thermal burns from molten polymer, immediately flush with cold water.
Do not attempt to remove cooled polymer from skin. Obtain medical attention.
Inhalation: Leave exposed area and seek fresh air. If irritation persists seek medical attention.
Ingestion: Not likely due to nature of product. If ingested, drink plenty of water. Do not induce vomiting. Consult a
physician if symptoms persist.
5 FIRE AND EXPLOSION HAZARD
Extinguishing Media: Water spray, dry powder, and foam. Carbon dioxide (CO2)
Safety Precautions for Persons exposed to products of combustion should wear NIOSH approved self contained
breathing apparatus and full protective equipment.