Instruction Manual

Introduction
Features
Card Interface AGP Pro 50 card designed for systems that have a 50-watt
AGP Pro slot.
N
OTE: THE WILDCAT4 7210 OR WILDCAT4 7110
CANNOT PLUG INTO A STANDARD AGP SLOT.
Video Memory
Wildcat4 7210
§ Frame Buffer: 128 MB
DDR memory
§ Texture Buffer: 256 MB
DDR memory
Wildcat4 7110
§ Frame Buffer: 128 MB
DDR memory
§ Texture Buffer: 128 MB
DDR memory
Graphics Controller High-speed Wildcat4 chipset technology with dual display
support.
RAMDAC 320 MHz
Plug-and-Play Monitor Support Yes
OpenGL 1.3 Support Yes
DirectX 7 Support Yes
OpenML 1.0 Support Yes
Maximum Resolution; Aspect Ratio;
Refresh Rate
2048 x 1152; 16:9; 75 Hz
N
OTE: SUPPORTED REFRESH RATES, MONITOR RESOLUTIONS,
ASPECT RATIOS, AND COLOR DEPTHS DEPEND ON YOUR TYPE
OF MONITOR
, WHETHER OR NOT YOU HAVE MULTISAMPLING
SELECTED AND IF YOU ARE USING SINGLE OR DUAL
MONITORS
. SEE Appendix A, Specifications, FOR A LIST OF
SUPPORTED RESOLUTIONS AND REFRESH RATES
.
T
O DISPLAY AT A SPECIFIC RESOLUTION WITH THE DESIRED
REFRESH RATE
, BOTH THE VIDEO CARD AND MONITOR MUST
SUPPORT THAT REFRESH RATE
. REFER TO THE
DOCUMENTATION THAT CAME WITH YOUR MONITOR FOR A
LIST OF SUPPORTED VIDEO RESOLUTIONS
.
Power Management Support
· Display Power Management Signaling (DPMS)
· Advanced Configuration and Power Interface
(ACPI)
Geometry Acceleration
· Model view matrix transformation of vertex and
normal coordinates
· Perspective and viewport transformations
· Texture matrix transformation of texture
coordinates
· Local display list storage and processing
· Full lighting calculations (up to 32 lights)
· View volume clipping
· Up to six user clip planes
· Image processing
Traditional 2D Operations
· 16- and 32-bit color depths (565, 8888)
· Solid, patterned, and gradient area fills
· Vectors (diamond rule compliant)
· Block moves (screen-to-screen)
· Block gets (screen-to-system)
· Block puts (system-to-screen)
· Bilinear scaling
3Dlabs Graphics Accelerator Card User's Guide
3