User Manual

42
6.1.2 Main Interface
This is the screen you’ll use most of the time when flying Solo. It’s available by tapping Fly Solo on the home screen.
The main screen provides the live video feed from the GoPro camera, telemetry statistics, access to Smart Shots
and the map view, and more.
Figure 6.1.2.1: App - Main Interface
1. Live video feed: Shows video from the camera mounted on Solo.
2. Go to home screen: Returns to app start.
3. Horizontal distance from launch point: Solo’s distance from the starting point, disregarding height.
4. Altitude: Solo’s vertical distance from starting point.
5. Current flight mode: Fly by default, or active Smart Shot.
6. Solo battery percentage remaining: Also visible on Controller screen.
7. Controller signal strength
8. Shot List: Access to Smart Shots.
9. Map view (see following for details)
10. Camera controls (see Section 6.1.4 for details)
11. Alerts and instructions
To toggle advanced telemetry data, tap any of the telemetry readouts at the top of the screen: item 3, 4, 6, or 7. The
additional information appears as follows:
Figure 6.1.2.2: Advanced telemetry data
1. Solo’s current air speed
2. Number of satellites and HDOP
3. Solo battery voltage and amperage
4. Wi-fi signal strength between Solo and Controller