User Manual

56
Figure 6.5.1.1: App - Orbit Setup
6.5.2 Orbit Operation
To fly Solo along the Orbit path, tap the left and right arrows at the bottom of the app screen, labeled Orbit Left and
Orbit Right. The default cruise speed for Orbit is 2.2 mph (1 m/s).
Figure 6.5.2.1: App - Orbit Controls
To control Orbit using the controller, move the right stick left and right to fly Solo along the Orbit path. You can
move Solo toward and away from the subject by pushing the right stick up and down, respectively.
To temporarily override the camera’s lock on the subject and look left and right, move the left stick.To adjust Solo’s
altitude, move the left stick up and down. If you have the Solo Gimbal installed, you can change the pitch of the
camera with the paddle on top of the controller. To stop Solo at any time, press Pause. To exit standard flight, press
Fly.
Figure 6.5.2.2: Orbit
Orbit
Adjust radiusAltitude
Camera
Subject altitude
Controls
Solo orbits at a constant altitude relative to its launch point, and does
not account for changes in ground level. Be aware of any elevation
changes at your location that would affect Solo. Before starting Orbit,
always ensure there is a clear path for Solo.