User's Manual
3e–527A3 Wireless Access Point – 8 Port Chapter 5: Wireless Bridge Conguration
82 29000152-001 B
3e–527A3 Wireless Access Point – 8 Port Chapter 5: Wireless Bridge Conguration
29000152-001 B 83
AUTO BRIDGING GENERAL SETTINGS OPTIONS
Bridging Mode
Auto Bridging auto bridging selected
SSID
numbers or letters Can be any set of letters and numbers
assigned by the network adminis-
trator. This nomenclature has to be
set on the wireless bridge and each
wireless device in order for them to
communicate.
Max Auto
Bridges
1-40 Maximum number of auto bridges
allowed.
Bridge Priority
1-40 Determines the root STP node. The
lowest bridge priority in the network
will become the STP root.
Signal Strength
Threshold
27%
21%
15%
9%
None
Prevents the node under the thresh-
old from associating and joining the
network.
Broadcast SSID
Diable/Enable When disabled, the AP hides the SSID
in outgoing beacon frames and sta-
tions cannot obtain the SSID through
passive scanning.
Also, when it is disabled, the bridge
doesn’t send probe responses to probe
requests with unspecied SSIDs.
Signal Strength
MAC
The signal strength of this wireless
bridge will be indicated on the Signal
Strength LED located on the front of
the case.