User Manual
3e-528 Wireless Video Server Chapter 4: Video Conguration
58 29000142-001 A
3e-528 Wireless Video Server Chapter 4: Video Conguration
29000142-001 A 59
IP Setup through Telnet:
To set up a new IP address using telnet, a command prompt needs to be
opened in the PC with access to the WAN port of the 3e-528.
1. In the command prompt type “telnet 192.168.254.30 [enter]”
2. The system will prompt for a password. By default, this password
is blank, so just press the “enter” key.
3. Once logged in the system, type the command “ip” follow by the
IP address wanted, the subnet mask, and the gateway IP.
Example: “ip 192.168.254.90 255.255.255.0 192.168.254.1 [enter]”
4. Once the system accepts this command, you need to enter “reset”
so the new IP is nally congured. Note: after this Telnet won’t
respond, so you need to hit “Crt+[“ and type “quit”.