User Manual

3e-528 Wireless Video Server Chapter 5: Bridge Conguration
72 29000142-001 A
3e-528 Wireless Video Server Chapter 5: Bridge Conguration
29000142-001 A 73
Point-to-Multipoint Bridging Setup Guide
Direction Bridge 1 Bridge 2 ~ n
Wireless Conguration – Bridging
Wireless Mode
802.11b/g Mixed 802.11b/g Mixed
Tx Rate
AUTO AUTO
Channel No
11 (must be the same as
Bridge 2~n)
11 (must be the same as
Bridge 2~n)
Tx Pwr Mode
Auto Auto
Spanning Tree Protocol
Must be enabled Must be enabled
Bridge signal strength LED port
Enter from list at the bot-
tom of the screen
Enter from list at the
bottom of the screen
BSSID
Add Bridge 2~n MAC Add Bride 1 MAC
Wireless Conguration – Bridging Encryption
Wireless Conguration – Bridging
Encryption
Select appropriate key
type/length and value.
Must be the same key as
Bridge 2~n.
Select appropriate key
type/length and value.
Must be the same key
as Bridge 1.
The above recommended setup requires only Bridge 1 to be set in
point-to-multipoint mode. It is possible to set all bridges in point-to-
multipoint mode, in which case , each bridge would have to contain the
BSSID for each of the other bridges and Spanning Tree Protocol must be
Enabled.
As stated previously, complete any other setup screens following gen-
eral instructions in Chapter 3.