User Manual

3e-528 Wireless Video Server Chapter 5: Bridge Conguration
72 29000142-001 A
3e-528 Wireless Video Server Chapter 5: Bridge Conguration
29000142-001 A 73
Repeater Bridge Conguration
A repeater setup can be used to extend the wireless signal from one
bridge connected to an Ethernet LAN wirelessly so that another bridge
can control a wireless LAN at a distance.






 
 
 







Repeater Bridging Setup Guide
Direction Bridge 1 Bridge 2 Bridge 3
Wireless Conguration – Bridging
Wireless Mode
802.11b/g Mixed 802.11b/g Mixed 802.11b/g Mixed
Tx Rate
AUTO AUTO AUTO
Channel No
11 11 11
Tx Power Mode
Auto Auto Auto
Spanning Tree
Protocol (STP)
Enable (or Diable
if no bridging loop
possible)
Enable (or Diable
if no bridging loop
possible)
Enable (or Diable
if no bridging loop
possible)
Bridge signal
strength LED port
Enter from list at the
bottom of the screen
Enter from list at the
bottom of the screen
Enter from list at the
bottom of the screen
BSSID
Add Bridge 2's
MAC
Add Bridge 1's and
Bridge 3's MAC
Add Bridge 2's MAC
Wireless Conguration – Bridging Encryption
Wireless Congu-
ration – Bridging
Encryption
Select appropriate
key type/length
and enter key value.
Must be the same as
that on the other 2
Bridges.
Select appropriate
key type/length
and enter key value.
Must be the same as
that on the other 2
Bridges.
Select appropriate
key type/length
and enter key value.
Must be the same as
that on the other 2
Bridges.
With this conguration, each bridge can control a wireless LAN. All
wireless clients must have the same SSID as the bridges on the AP card
channel. All clients can roam between the three bridges.
All other setup screens should be completed following the guidelines
in Chapter 3.