User Manual

3e-528 Wireless Video Server Chapter 6: The RF Manager Function
29000142-001 A 75
Chapter 6: The RF Manager Function
Introduction
This chapter addresses a function of the 3e-528 which facilitates
remote management and programming of the Radio Frequency function
for multiple 3e-528s located on a common network. This function allows
you to remotely manage the Radio Frequency Power levels. For each AP
selected, the RF Manager can remotely disable the AP's transmit power
and, in turn, the transmit power of each client that is associated with it.
The basic architecture is shown in the chart below.
RF Manager
Disable Tx Power
Client 1: Disable Tx Power
Client 2: Disable Tx Power
Client 2: Acknowledges
Disabling Power
Client 1: Acknowledges
Disabling Power
~
~
10 seconds after
RF Manager Request
Client 1 Disables Power
Client 2 Disables Power
AP Disables Power
Access Point Client 1 Client 2
CAUTION: You can not use this utility if you are using dynamic
IP address assignment on your wireless network. We recommend
that you have your LAN Administrator set a range of static IP Ad-
dresses and that you change the WAN IP Address on each gateway to one
of this range of IP Addresses as part of your setup process.