User Manual

3e-528 Wireless Video Server Chapter 6: The RF Manager Function
78 29000142-001 A
3e-528 Wireless Video Server Chapter 6: The RF Manager Function
29000142-001 A 79
You can now edit the le by adding the IP addresses of the 3e-528s
that you want to manage, each in a pair of brackets [ ].
The two les SampleRadioOn.3eti and SampleRadioOff.3eti must be
edited as a minimum. This will permit you to turn all the APs on or off
at will. You can save them to another le name if you wish (maintaining
the same le extension.) Note, if you turn all APs off and then re-enable
transmit power, be aware that the clients, which have also been turned
off, will have to be individually re-engaged, either by rebooting or by re-
inserting the PC Card.
You can customize les to control only certain APs or groups of APs.
Each AP that you group into a conguration le must have the same Ad-
min Password.
The following gives you a sample of the code that you can use from
the SampleRadioOn.3eti le.
Sample of coding in SampleRadioOn.3eti le
# This Sample Conguration le shows how to turn the radio
# to a xed level on all units
[all]
Wireless Tx Pwr Mode:=Fixed
#For FIPS units use the following
#Gateway Access Mode:=HTTPS
#Gateway Username:=CryptoOfcer
#Each unit that you want to turn on should be listed here
#First unit
[192.168.15.1]
Wireless Fixed Pwr Level:=2
#Next unit
[192.168.15.2]
Wireless Fixed Pwr Level:=2