User's Guide

3e-531AP Wireless Access Point

Chapter 5: Bridge Con guration

29000125-001 C

In the second section on the

Wireless Con guration — Bridging

screen, add the BSSID of the remote bridge. The BSSID corresponds to

that bridge's MAC address. In entering the BSSID, enter only hexadecimal

numbers, no colons. Data entry is not case sensitive. You may also enter

a note that de nes the location of the remote bridge. Then click

Add

accept. The remote bridge's BSSID will now appear in the third section of

the page. If, at some time, you wish to delete the entry, simply click the

check box next to it and con rm by clicking

Delete

Next, navigate to

Wireless Con guration — Bridging Encryption

Select the appropriate key type and length and the key value. The encryp-

tion key value and type for Bridge 1 must be the same as for Bridge 2.

You must complete the con guration of your Bridge 1 by visiting the

other screens included in the navigation bar and following the general

instructions in Chapter 3 of this guide to establish any other required con-

 guration options such as General, WAN and LAN settings.

Con gure the second of your two point-to-point bridges following the

instructions given for Bridge 1 above.