User Manual

http://www.3jtech.com.tw
http://www.pnpipcameras.com
G2wifiIII User’s Guide
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
22
3.1.4 Advanced Routing Settings
In Static Routing Settings, the user can set up a route rule (table) here. Refer to the description of the
following parameters to set up the necessary route rule, and click the Apply button when you
complete.
Destination: The IP address of packets that will take this route.
Range: Includes Host and Net options. When selecting “Net”, there is another “Netmask”
column that needs to be filled out.
Netmask: The bits in the mask specify which bits of the IP address must match.
Gateway: The gateway for the routing.
Interface: Specifies the interface -- LAN or WAN -- that the IP packet must use to transit out of
the router when this route is used. Or you can choose the user-defined way by selecting the
Custom option.
Comment: Memo for the routing rule.
Routing Table: Lists the current route rules you have added before. Click on the Delete button
to delete the selected route rule.